As as example, if the web address DynDNS assigns you is: you would enter: into the web browser's address bar to access your camera. When accessing the camera from a remote location, just tag on the port number to the web address. Verify that the port numbers used are the same as what you entered in the AirPort Utility's Port Mapping option.Lastly, if all the wireless settings have no problem, but the camera still cannot connect WIFI, please try other encryption, even without encryption to test put the camera near your router to test.
Right (or Option)-click the IP address given in IPCT and choose Network Configuration.Use the IPCT utility to obtain the network configuration settings.Private IP Address: Enter the Static IP address you created above.Description: Leave blank or enter a desired description.Go to the Advanced window > Port Settings > New Entry.This address must be within the DHCP range of your AirPort. IPv4 Address: Enter the desired IP address you want reserved as a "Static IP" address for the camera.
#Foscam ip camera setup router mac#
MAC Address: Enter the wireless MAC address of the IP camera.Enter anything you like for the Description field.From the DHCP and NAT window > Reservations > New Reservation.Verify that the Router Mode = DHCP and NAT.Start the AirPort Utility > Select the (AEBSn) > Edit > Advanced > DHCP and NAT.Find your wireless network and input the login info.Ĩ02.11n AirPort Extreme (AEBSn) Setup (Note: I am assuming that you will be using version 6.x of the AirPort Utility from the iPad.).Choose Device Management, and then, Wireless LAN Settings.Log onto the camera using the IP address given by the IP camera tool (IPCT) using the default login given on the bottom of the camera.Plug the camera into your router with your ethernet cable.Note: I don't have this exact camera model, but the following worked for mine.